Decoration regret and experience summary 3

4 The wiring should be sufficient, unless it is determined that it will never be used, the best row that can be used is not available, and the location is considered to be good.
5 buy the sink and water valve 700 yuan, do not know the value is not worth.

The kitchen cabinet regrets not using the stainless steel feet, but the baffle used. We must not be unwilling not to be willing to die. It is not good-looking, but practical. The dirty basement below the cabinets, the breeding base for the mice, the mice, and the bugs are blocked. A cover, eyes are not the net, TXM's psychological feeling is not too good; socket is never enough, everyone's wall is recommended every 1M to be ranked one, next to each switch are ranked one, down when you know where it is The switch must be placed in the most convenient place, I was married every day by my wife
11. The guest did not install a sliding door. The subsequent multiple-choice questions were to open the door to block the washbasin or stop the mop pool.
12, buy any plate must be personally selected, otherwise JS is not black you are strange, I was lazy for a while
1. Don't leave the pipe between the gas pipe and the kitchen gas water heater. Open a slot in the wall to pave the PVC pipe. You do not need to punch the platen.
2. The power switch of the kitchen, such as kitchen exhaust, microwave oven and refrigerator, must be designed in advance.
3, the high floor should be equipped with booster pump, otherwise the gas water heater is hot and cold when taking a bath.
4, triangle valve, metal hose must be sure to buy good quality.
5, the soft light belt is too dark, or buy a hard light with good.
6, do not buy furniture to do, if you really want to open, to do, to be able to move, and later can be eliminated.
7, bathroom cabinets can go to the company with a custom cabinet, but to do the following metal feet vacant, otherwise leaked after a bad repair, usually cleaning is also convenient.
8, windowsills do not pack wood window covers, wind and rain not finished in 2 years. Even if one wipes a window, it will be crushed.
9, the toilet must be waterproof, including the ground, walls.
10, washbasin and faucet size to match
11, the bathroom tiles have a waist line and tiles should be thought in advance, other things in the future do not block or conflict
12, to buy the above opening washing machine
13, the floor of the wood keel do not save, to buy good
14. Light switches for rooms and stairs should be double
15, TV background is not complicated, simple and simple
16. Don't buy fabric sofas for families with children, unless you are super-energetic; the gap between the handrails of the stairs should be closer, and do not use glass or iron. . . . . . Do not buy sharp-edged, glassed tables, cabinets, TVs, etc.
17, Do not buy double towel rack
18, put the cosmetics bathroom glass shelf to buy good quality, occasional bath, shower gel heavy point, on the glass, glass clip quality is poor, loose, glass smashed down. . . . . .
19. Do not use the red, blue, and green lights in the living room. . . . . .
20, kitchen tiles do not buy matt, otherwise it is difficult to greasy greasy
Kitchen, bathroom use white floor tiles .... I would like to become a shadowless leg + bald
2. The bathroom uses a swing door - it was originally installed for Sliding Doors due to various reasons. Finally, using a swing door resulted in a small space. Unless the bathroom is really luxuriant, it is best to use sliding doors to save space
3 deodorant floor drain water N slow...
4 bathroom does not do anti-fog mirror...

1. Don't look for the decoration foremen introduced by acquaintances. If you do not discuss the cut, it is easy for you to produce numbness and relax your vigilance.
2. If God gives me a chance to renovate, I will choose to clear the package, especially the hydropower project.
3. There are as few woodworkers as possible. It seems that the lessons of TX's blood are good. Now the home cabinets made by woodworking cabinets, second bedroom wardrobe, so ugly, ah, the shoe is to do the dead, want to throw away are difficult. Carpenter door covers, window covers, and doors are also available.
4. Good to regret the two-bedroom wardrobe package to let the decoration team to do, foreman with Pauli plate inside, with a lot of Wannianjiao, some worry about environmental issues, there are children's room wardrobe panel posts fire board color does not look good . I heard that good visitors and other places can also be customized to the top of the wardrobe. However, the capacity of the wardrobe is large, and you can put more than N things. People can hide it without problems.
4. The ceiling of the living room does a bit more. The TV background wall has a block of protruding objects and the background wall is as simple as possible.
5. The switch sockets in the kitchen are still not arranged. The light switch on the north balcony is blocked by the kitchen cabinets. To knock out the tile, two walls, one wall socket, there is a socket on the gas stove, Can only be sealed with a white panel, can not be used, the other wall is less, after the microwave oven, rice cooker do not know enough to plug. Other places do not know if there will be any problems.
6. The vitrified tiles and tiles are expensive to buy. Afterwards, if you have problems to knock tiles or tiles, you will feel bad. There are also buy ceramic tiles that start to buy more, if you do not make up the bricks, the trouble is not to say, the freight costs a lot.
I also say two sentences
1, Carpenters try to do less
2, look at the direction of the cassette before buying lights and switch sockets, and some different direction of the switch screws
3, if you make a mistake, you can't change it.
4, buy something to see the trademark, do not listen to what JS said OEM, authorized, a factory, etc. nonsense
5, the best dark floor tiles
6, can not remember

Urgent notices that there is a serious problem with Oulong's new-generation benzene removal paint. They will open an example and ask the insiders of the factory. They also said that they will open an example, they cannot use and purchase, and the manufacturer solves the problem. It is also unreasonable to make trouble. There is no sincerity. Paint, customarily we call it paint. Whether it is high-level decoration or ordinary decoration, it will use paint. The first role of the paint is to protect the surface, and the second role is to modify the role. In terms of wood products, due to the porous structure on the surface of wood products, it is not resistant to dirt, and at the same time, the surface of the wood is multi-sectioned and unattractive. Paint can solve these problems at the same time. Here are the types, choices, and precautions for paint. Of course, due to the fact that there are too many types of paint, we only introduce the part that belongs to the decoration. 1. Classification of paint 1) Classified by site. Paint is mainly divided into wall paint, wood paint and metal paint. Wall paint, including exterior paint, interior wall paint and top paint, mainly latex paint and other varieties; wood paint mainly lacquer, polyurethane paint, etc.; metal paint is mainly enamel paint. 2) Classified by status. Paint can be divided into water paint and oil paint. Latex paints are the main water-based paints, while nitryl paints and polyurethane paints are mostly oil paints. 3) Classified by function. Paints can be divided into waterproof paints, fireproof paints, anti-mold paints, anti-mosquito paints, and multifunctional paints with various functions. 4) According to the role of classification. Paint can be divided into volatile paint and non-volatile paint. 5) Classification by surface effect. Paint can be divided into clear paint, translucent paint and opaque paint. 2. Variety of paints 1) Wood lacquer. (1) Nitro varnish. Nitro varnish is a kind of transparent paint made of nitrocellulose, alkyd resin, plasticizer and organic solvent. It is a kind of volatile paint, with quick drying and soft gloss. Nitro varnish is divided into light, semi-matt and matte, which can be selected according to the need. Nitro-lacquer also has its disadvantages: high wet weather is easy to whiten, low fullness, and low hardness. (2) Hand sweep paint. Nitro lacquer is also a nitrocellulose paint. It is a non-transparent paint made of nitrocellulose, various synthetic resins, pigments and organic solvents. This paint is specially formulated for artificial construction and has a quick drying feature. (3) Main auxiliaries for lacquer: a. It is a colorless, transparent liquid with a banana odor that is made by mixing organic solvents such as esters, alcohols, benzene, and ketones. It mainly initiates the lacquer and curing of nitrocellulose. b. White water. Also known as anti-white water, the scientific name is ethylene glycol monobutyl ether. In the wet weather construction, the film will have a whitening phenomenon. Adding 10%-15% of the diluent to the nitromagnetized white water can be eliminated. (4) Polyester paint. It is a thick paint made of polyester resin as the main film forming material. The paint film of polyester paint is full and the layer is hard. Polyester paints also have varnish varieties called polyester varnish. Polyester paints need to be cured during the construction process. The amount of these curing agents accounts for one-third of the total paint content. These hardeners are also called hardeners and their main component is TDI (toluene diisocyanate). These TDIs that are in a free state will turn yellow, which will not only make changes to the furniture, but will also cause yellowing of adjacent walls. This is a major drawback of polyester paints. A yellowing-resistant polyester paint has appeared on the market at present, but it can only achieve "yellowing resistance." It cannot yet be completely prevented. In addition, free TDI beyond the standard can also cause harm to humans. [See Section IV(3) of this chapter for details. ] (5) Polyurethane paint. Polyurethane paint is polyurethane paint. Its film is tough, full gloss, strong adhesion, water resistance, wear resistance, corrosion resistance, is widely used in advanced wood furniture, but also for the metal surface. The main disadvantages are the influx of bubbles, paint film powdering and the like, as well as polyester paint. There are also problems of yellowing. The varnish type of polyurethane paint is called polyurethane varnish. 2) Interior wall paint. Interior wall paint is mainly divided into water-soluble paint and latex paint. General renovations use latex paint. Latex paints are emulsion paints. According to the different substrates, they are divided into polyester acid vinyl emulsion and acrylic emulsion. The latex paint is made of water as the diluent, which is a kind of lacquer that is easy to use, safe, washable, and has good air permeability. Different colors can be formulated according to different color schemes. Latex paint consists mainly of water, pigments, emulsions, fillers and various additives. These raw materials are non-toxic and may contain mainly organic mercury in the film-forming agent ethylene glycol and fungicide. At present, the so-called “latex paint” that contains a large amount of formaldehyde on the market is actually a water-soluble paint, not a latex paint. Some unscrupulous manufacturers use inferior water-soluble paints to fake latex paints. Therefore, choosing the right goods and maintaining ventilation is an effective way to prevent pollution. 3) Exterior wall paint. The basic performance of exterior latex paint is similar to that of interior latex paint. However, the paint film is harder and has stronger water resistance. Exterior latex paints are generally used on exterior walls and can also be used in high humidity areas such as toilets. Of course, exterior latex paint can be used internally, but please don't try to use exterior latex paint for external use. 4) Fireproof paint. Fire-retardant paint is a kind of flame-retardant paint made of film-forming agent, flame retardant, foaming agent and other materials. Due to the heavy use of flammable materials such as wood and fabrics, fire protection is already a worthy issue. 3. The choice of paint (1) According to their own needs to choose the right kind of paint. Can not blindly pursue a "premium", not to mention cheap to buy some inferior products. (2) Try to buy in specialty stores or large stores, and pay attention to the advantages and disadvantages of its packaging. (3) Don't rely on advertising data. What you need to care about is whether the product meets the national standard (GB).
Let's talk about what clear water and mixed water are like the water. It is very clear that you can see the bottom of the river. The paint used is transparent. You can see the color and pattern of the surface being painted. The water is very demanding for the woodworking. The material is also very particular about the regular commonly used water splints are ash, red peony, white peony, black walnut, red walnut, cherry, maple, oak, Sapele, teak, iron knife wood, zebra wood, Various kinds of technology wood and so on.
Semi-clear and semi-smokers are as clear as water and can see the bottom of the river is very vague, the paint used is transparent plus color powder, painted on the surface of the object.
Mixing water is very much like water, can't see the bottom of the river, the paint is colored, coated on the surface of the object, and can completely cover the painted object.
What is called "dark water mixing" is the same as the practice of clear water, but when doing paint, the surface of the material to be coated is repaired and shaping is carried out. The color of the layer is liked and the varnish is applied again. Afterwards, the practice is the same as that of clear water.
Decoration regret - hydropower project
1, less outlets. There is no single outlet in the large stairwell, and the cutting machine must pull the line from the bathroom when laying floors. It is inconvenient to think about using a vacuum cleaner
2, switch socket behind the door
3, install the switch box to choose good quality, do not underestimate this cartridge, that kind of poor, installed two switches is not alright, change can not change!
4, mop pool faucet to be set according to the height of the mop pool, too high and old splashes of water outside
5, the location of the socket must be considered good, my home kitchen outlet almost blocked the microwave oven
6, washbasin bathroom, buy better than their own and look good. (My home marble countertops, it took more than 500 meters, not worthwhile).
7. Be sure to think thoughtfully before decorating. Can not ignore the small part, such as buying a cassette before you first look at what kind of switch you want to choose, if it is a normal switch that can choose 86 (standard) cassette, but if you want to choose Siemon 60 series of such a switch, To choose a non-standard cassette. Try not to make woodworking furniture. You can buy off-the-shelf products and buy ready-made ones. Covert works must be done well, especially the location of the kitchen sockets should be appropriate, otherwise it will affect the size and overall effect of kitchen cabinets.
8, (1) The balcony is best fitted with a sitting seat.
(2) For the sake of safety, it is best to install a socket at the upper end of the kitchen door so that the gas alarm can be placed in the future. This must not be saved.
(3) If it is a narrow kitchen, the cabinet is on the head again. It is better to put a chandelier above the cabinet. Otherwise, it will be backlit at night.
(4) The ceiling light of the bedroom is preferably double-controlled, one beside the door and one beside the bed, so as to save the winter and lie down on the bed and turn off the lights.
9, the location of the socket must be considered good, height, interval. Even when I first hit the location of the cassette, I encountered a steel bar. After the box was placed, I found that it was just blocked by the TV cabinet, microwave oven, and desk. I had to move the first two furniture positions high and found that it was not only highly ergonomic, but also it could not be bought. Good stainless steel cabinet feet can only be customized aluminum feet.
10. How many sockets should the bathroom retain?
In addition to the ordinary left in the basin near the basin, the basin under the basin left one (after a small water heater), leaving one near the toilet (later guard washing power)
Also note that the socket should not be placed in a narrow space behind the door, taking into account the distance of the plug, there is the best to buy that with a panel, some unused sockets are not easy to damage
11. There are too many lights in the aisle ceiling, and they are connected in series. The light is bright enough, but the old man is too power-consuming to open up. In fact, it is only necessary to install one at a corner of the aisle, that is, bright and effective.
12, too few sockets, location did not consider carefully
13, did not consider the table place when installing the lamp, now the lights are not in the middle of the table
14. The telephone socket outlet of the master bedroom was located at the beginning of the assessment and it now appears to be exposed outside the nightstand.
Forgot to consider the location of the microwave oven, now have to be placed on the dining sideboard of the restaurant pp, I do not know if they can not let go?
15. My northern balcony originally believed the Shuidiandian nonsense. There was no floor drain.
Only the drain of the washing machine is left!!
16, when the air conditioning hole was not considered a good wardrobe position, now a door can not open straight, pants racks can not pull out
17, is a towel rack hanging towel, there are double rod and single rod, when buying it may feel good looking double rod, and the towel can be linked to more than two, but the actual use is not the case, different purposes Towels cannot be hung together, which means that one towel rack is to hang two towels. The other stem is not needed. It is still a bar.
18, take off the baffle before considering whether to choose to sacrifice the amount of exhaust row exhausted or choose the neighbor's home fragrant
19, socket location is critical, if not first considered, there will often be two consequences: too little installed or installed in the wrong place, needless to say, the location of the wrong may cause: and other equipment, furniture The conflict is blocked by other devices and furniture and is useless.
Sockets should be installed in multiple ways, rather than lack of use; think about what you may buy in three years or even five years, what kind of power Dongdong, these winter is how to use the experts suggested: first pick furniture renovation now begins this year In the first decoration season, many owners who just got their new house keys began to rush to the major building materials markets, collecting information on decoration companies, looking for designers to study their own units, and agreeing on a renovation plan. In fact, more and more people in the industry are advocating the process of selecting furniture after renovation. I suggest you try it out.
Designers look through the style of furniture, most consumers do not have much experience in decoration, just in the newspapers or the Internet to understand some of the basic knowledge of the decoration, in the process of communication with the designer rarely have their own opinions, it is easy to be The idea of ​​the designer is about.
The experience of Miss Zou, the reader, is to select the furniture and then choose the designer. Through her choice of furniture, the designer learned about her favorite home style, and then integrated the products she chose into his designs. The whole family style was unified.
Most consumers only consult the designers by taking the floor plan. He does not understand your preferences and can only continue with some of his original design styles, or even apply the original one directly to the renovation of your home. In the process. This kind of renovation program can not reflect your own personality more, and it always looks like some familiar feelings, so that you may also be limited in the choice of building materials and furniture. Some of your favorite products may not be consistent with the original design. The overall decoration style, so can only give up.
When Mr. Cai’s decoration was reserved for furniture space in advance, cabinets, shoe cabinets and other furniture were handed over to the decoration company, which not only saved time and effort, but also avoided the problem of improper size of the furniture he purchased. However, the furniture made on the spot by the decoration company pays too much attention to the use of functions, and it lacks the grasp of the appearance and the direction of the trend, but it cannot meet his needs for fashion home.
Therefore, more time and money should be spent on the selection of finished decorative products during the renovation. Before choosing the furniture, there is no limit to the limited space reserved for the furniture. The owner has a wider range of options to avoid leaving regrets.

First set the furniture to reduce the increase readers Miss Huang said that the first choice of furniture is an effective way to control the cost of decoration. Renovated people know that the final decoration is basically beyond the original budget, because there are often unpredictable additions in the renovation process, somehow more than a few cabinets, consume more naturally consume more , Your length of time does not say, but also more money, which is not reflected in the decoration company's initial quotation. After selecting the furniture, you can just hand over the part of the basic project to the decoration company to avoid unnecessary additions.
There must be no shortage of functional styles. Of course, you need to do some preparatory work before purchasing furniture. First measure the size of the living room, then design the type, function, style, color, and quantity of the required furniture so that the target is clear and time-saving. Many furniture markets now have more aggressive promotional activities, I believe you can certainly choose to both affordable and stylish furniture products.
Complete decoration process (starters must see)
Design stage I. Looking for a design company
1. Excellent design company prerequisites:
The architectural decoration design qualification is divided into professional grade A, grade B, grade C and professional grade qualifications. Only those with strong overall strength can obtain grade A and grade B qualifications.
General design companies tend to design their own design companies carefully. Therefore, the design of the company itself can often see the company's design and design style.
In addition, the design company's level can not be fully reflected in a simple comparison with each other, only the best for their own; there are also differences between the design company's internal designers. Therefore, we cannot blindly believe oral rumors.
2. Excellent design company hardware facilities and soft environment:
Hardware facilities are prerequisites for designing companies. In order to complete one or more sets of designs, general design companies must at least include hand drawings, three-dimensional renderings, and construction details, and need to use drawing boards and drawing tools. Computer (better configuration), printer, plotter (
A3 or more drawings and scanners can be drawn. In addition, such as blueprints and other equipment, due to business volume restrictions and high cost of acquisition, generally commissioned professional agencies to complete, the general business is not.
A soft environment is a necessary condition for an appraisal and design company to produce excellent works. Only companies with elegant design environment, good learning conditions, good incentive conditions, and fair assessment can produce more good works. Choosing a design company to consider at the same time as choosing a designer, sometimes choosing a design company is often a matter of choosing a designer.
The design company charging method and the charging design charging method are not the same, generally divided into two, the first is to pay half when signing the design contract, and the second payment time is when the first draft of the design is viewed.
The level of design fees: According to different levels of designer fees, the highest is generally well-known designers, the highest fees up to tens of thousands, often foreign or Hong Kong and Taiwanese; followed by senior designers, generally not less than 150 yuan / square meter; and then Is the chief designer, generally between 120-70 yuan / square meter; general designer charges between 75-45 yuan / square meter. There are also some decoration company designers are not charged.
II. Looking for a designer
1. How to examine the designer:
Excellent designers need to have at least a good aesthetic point of view and drawing skills, excellent room planning capabilities, a certain housing structure theory, can use ergonomics theory in practical design, and be proficient in CAD software, 3D design, PHOTOSHOP software and other related Graphics processing software.
In addition, they also need to have good communication skills, comprehension skills, strict and serious attitudes, and the qualities of modesty and trustworthiness. Some designers are often not quite as good as they are.
2. How to collaborate with designers Collaborate with designers is the most taboo distrust.
Cooperating with designers must be punctual, which is both sides.
Cooperating with designers must be clear about as many issues as possible beforehand.
III. Scheme diagram design
1. Simple advice when first meeting and talking When a general owner talks to a designer for the first time, designers often provide simple suggestions because of the low level of trust between the two parties. From these suggestions, it can be seen that the designers are skilled in the use of design, and at the same time, they can understand the designer's personality.
However, this person must not draw a bad conclusion from the first simple conversation. Because the designer’s inspiration comes from the first feeling,
More often than not, it comes from improvements in the process of creation.
2. A thorough understanding of the owner determines the design style.
The room is for the owner to live in, and the design style should also depend on the individual owner rather than the designer, but the design details should be finalized by the designer. Understand that the owner should clarify the structure of the family of the owner (eg family of 3, family of three generations), age structure (if the child has been in elementary school, has not married, the parents have retired, etc.), family-led personality (such as wife-based Family, wife's hobby is European style or minimalism, etc.), economic conditions, and occupation.
3. Deciding on the characteristics of the house determines the design plan.
The characteristics of a house include, first of all, factors such as the type of room, orientation, and floor, as well as the connection of each functional area.
House features also include specific dimensions, which are determined by the measurement size.
Measure the size of the house - the general company is after the signing of the design contract, the design fee should include this part of the cost.
Measuring the house Note:
1, the length of the straight line is correct
2, no angle deviation
3, do not forget to measure the height of the house
4, do not forget to measure the details of doors and windows balcony, air conditioning holes, downspouts, entrance door opening and other details
5, clear connection relationship
6. Accurately measure hydropower pipelines and connections
7. After drawing the initial map, if necessary, it is necessary to review the “original house plan” whose results are accurately drawn.
The basic layout of the first step: to determine the relationship between the entrance, restaurant, living room, stairs (if any exist) The second step: determine the function of the room, that is to determine the design of the study or not, old man room, children's room The third step: determine the traffic line , to meet the relationship between indoor activities and furniture layout The fourth step: determine the style, design the theme of the wall, select the color of repeated communication Because the understanding of the owner can not be completed once, the owner and designer communication should be repeated, and as much as possible All the issues were clearly explained, especially the above factors were fully understood.

Home decoration attention "sensitive area"
When you are doing home decoration in the spring season, you should pay special attention to the "sensitive areas" in these home furnishings. Especially in materials selection and construction, you must be especially careful to avoid quality problems. In order to prevent quality problems in the “sensitive areas” of home improvement projects, we have prepared a set of relevant articles for you, hoping to help you. Toilet Leakage: Strictly guarding the corners of the house Many homes in the renovation have to knock out the original bathroom tiles and lay new tiles. As a result of this, it is necessary to re-waterproof the wall of the bathroom. If there is a quality problem in the waterproofing project, water stains will hit the next room, and if it is heavy, it will leak downstairs, causing serious damage to your home and neighbors. There are many kinds of materials used for bathroom waterproofing at present, basically the waterproof effect is good. But you should pay attention to the specific construction details. 1. Level the bathroom floor first. If you want to change the floor tiles of the bathroom, you must first level the floor with cement mortar after the original floor tiles are cut, and then do the waterproof treatment. This will prevent leakage of the waterproof coating due to uneven thickness. 2. Joints should be brushed into place. The seams between the bathroom wall and the seams between the upper and lower water pipes and the ground are the most prone to problems. During construction, you must urge the workers to handle these corners. All waterproof paint must be applied in place. 3. Wall treatment is also very important. In the general bathroom waterproofing treatment, a waterproof coating of about 30 cm in height is also required on the wall to prevent water accumulation from passing through the wall. However, if the wall of the bathroom is a non-load-bearing light wall, the entire wall should be covered with a waterproof coating. If your home uses a two-seater shower screen, the two walls that are associated with it must be fully painted. If your home uses a bathtub, the height of the waterproof coating should be higher than the upper edge of the bathtub. 4. Waterproof experiment must be done. After the construction of the bathroom was completed, all the water in the bathroom was blocked, and a 25 cm high “can” was built at the entrance. Then, 20 cm of water was poured into the bathroom. After 24 hours, you can check whether there is any leakage around the wall and the ground. This 24-hour waterproof test is the key to ensuring the quality of the bathroom waterproofing project. You must do it. 5. Keep the water open. All sewers in the bathroom, including floor drains, sanitary ware plumbing, etc., should be kept open. In this way, we can fundamentally avoid the occurrence of the "flooded seven army" tragedy. The general manager of Jardine's boutique home improvement market, Jin Hao Wood Deformation: Maintaining a stable moisture content The most important At present, many families have used a large number of wood products in decoration, such as curtain boxes, heating covers, fixed furniture, wooden lines, and door and window covers. However, once the temperature and humidity in the room change greatly, some wood products will have problems such as cracking, warping and deformation. In fact, many quality problems in home decoration are due to the moisture content of wood products. Whether it is solid wood material or artificial board, all wood products contain a certain amount of moisture. Many consumers believe that the more dry the wood, the better. In fact, this view is biased. The moisture content of wood can only be maintained within the normal range to ensure that there is no quality problem in the decoration. For wood materials used in general households, the moisture content should be around 8%. If the moisture content is too high or too low, it will cause quality problems in the wood in the home improvement. In order to keep the moisture content of the wood stable, you should pay attention to the following points in the decoration: 1. Compared with the use of artificial boards and solid wood materials, the texture properties of various artificial boards are much more stable. Because the solid wood material has a texture, when the temperature and humidity change greatly, cracking, warping, and deformation will inevitably occur. The wood-based panel is to decompose wood into wood chips or wood pulp and re-make the boards. Because the original physical structure of the wood was broken, when the temperature and humidity changed greatly, the "deformation" of the wood-based panel was much smaller than that of the solid wood. 2. Construction Attention Details In home decoration, the key to the quality of wood is construction, especially the details: ● After all the wood products are installed, paint them once. This layer is called "topcoat" paint, not only can protect wood products, but also can play a role in insulating moisture and maintaining the normal moisture content of the wood; ● Can not drown in the binder. In home decoration, white latex is generally used as a binder for joints of wood products. Some workers dip water in white latex in order to cut corners. Not only does this reduce the strength of the binder, but after the wood product absorbs moisture, it is prone to quality problems; ● All the wood should be placed for a few days. After you purchase the wood for decoration, it is best to put it on the decoration site for a few days before use. The purpose of doing so is to make the moisture content of wood close to the level of new homes. 3. Beware of purchasing materials When you purchase wood for decoration, the moisture content of the wood cannot be determined solely by eye and hand touch. So someone sighed: If you only rely on appearance inspections, the moisture content of wood can be described as “divine and difficult to distinguish”. In fact, there are some tips that can help you determine if the moisture content of the wood is acceptable. The characteristics of dry wood are generally obvious, the weight is significantly reduced, the feel is not cool, the sound of knocking is crisp, the sound of “squeaking” sounds when the planer is pushed, the wood shavings are heated, and the planer is light. The wood material with high moisture content has a heavy body, a cold feel, and is not brittle when pushed by a planer, and even the shavings produce water. This type of wood cannot be used. Cracked insulation wall cracking: a lot of clever ways to adopt the current in many new homes, there is a new type of insulation wall with insulation. This type of wall decoration is very vulnerable to the problem of cracking latex paint. In fact, this cracking is caused by cracks in the wall's cement, or the cracking of the wall's "insulation board" joints, not the quality of the decoration, but the architectural insurmountable flaws. In order to pursue the best decorative effect, use decoration to make up for building defects. The decoration company's technicians come up with many ways to deal with cracks in the insulation wall. You can choose according to your own actual situation and decoration budget: 1. After the wall surface is cleaned, first apply a layer of Dacron cloth, kraft paper or newspaper on the wall surface, and use the tension of the fiber to ensure the integrity of the latex paint film. This method is relatively simple and easy, but the effect is general. 2. Remove the insulation board on the surface of the wall, or remove the cement wall. Install a layer of gypsum board or “5 PCT board” on the outside of the insulation layer, and then do the latex paint on it. This practice can remove all irregular cracks, cracks are generally the joints between the plates, better handling. However, this method is expensive and difficult to construct. 3. Use a decorative material with elasticity. At present, on the wall surface treatment, there is a kind of “elastic putty” that can make up for the wall crack problem to some extent. Nippon Paint's "three in one" can also play a role in covering the small cracks on the wall. However, these materials have less "elasticity" and do not work on cracked walls. In addition, some consumers simply remove the wall insulation. Although this method can be used once and for all, it will reduce the insulation and thermal insulation performance of the wall. Therefore, it is not recommended that you use home decoration which is the focus of your home. Each space has its own purpose. However, in the decoration, it is necessary to have a focus: Some rooms need to spend more, and some places can be simply decorated. This not only highlights the key points but also eliminates unnecessary expenses. It should be the basic principle of home improvement.
■ In the important living room of the living room and the bedroom, the form of “little bedroom” is more and more. In this case, you may wish to invest a bit more in the living room and spend less on the decoration of the bedroom.
In addition to using the living room as a receptionist, more functions are the place for family reunion and entertainment. Therefore, it is said that the living room is the family's "face." For "face" decoration, you can spend as much as you can.
The most important thing is to decorate the living room to reflect the characteristics of this family. More money is relative, but there is no need to pile up high-grade materials, the key is to be novel in decoration techniques, in the configuration of furniture, the selection of decorations, to be elegant and generous. In contrast, the decoration and decoration of the bedroom can be a bit simpler. Because the function of the bedroom is relatively simple, it is only a space for people to rest. The decoration is simple and warm, but it does not need to be too sculpted, but the bed must be very comfortable.
â–  Treat "top, wall, floor" differently
At present, the net height of the room is generally low, ranging from 2.50 meters to 2.80 meters. In order not to create a sense of depression, it is better to be simple on the top. From the perspective of human visual habits, the top of the room is the least valued place, so there is no need to be too complicated.
The wall is not covered by furniture. It is used as a backdrop for accessories such as paintings. At the same time, it needs to leave more blank walls for ventilation. Therefore, the wall does not need to spend more money on decoration. In particular, there is no need to do a lot of lines to shorten the sense of height. .
For the decoration of the ground, you need to work hard. Because of the material and color of the floor decoration material, the decoration style of the room is determined. Moreover, the use frequency of the ground is obviously higher than that of the wall surface and the ceiling. Therefore, materials with better texture and color should be used.
Wall coating decoration problems The raised coating of the coating shows this situation, mostly due to the fact that when the water-soluble coating is used, the moisture inside the wall is not yet dried and the wall continues to volatilize to the surface. Therefore, users of new homes must be fully rehydrated after the water in the walls is completely evaporated. If bulging occurs during the finishing process, the blisters can be scraped off and painted again. The appearance of mildew If the wall is painted under high temperature conditions, dark gray mold often appears on the wall, which is caused by the wall mold growth. Therefore do not work under high temperatures and wet weather. If this happens, the moldy area can be wiped clean and sprayed 1-2 times with 7%--10% aqueous solution of trisodium phosphate. There are many reasons why the coating peels off when the coating is peeled off. For example, the wall surface contains oil, dust, and moisture. Therefore, all the underlayers must be thoroughly cleaned and smoothed before being painted. Coating discoloration Common coatings are often susceptible to yellowing after sun exposure or contamination with alkaline substances, as a result of UV and alkaline oxidation. Therefore, for strong sunlight or areas susceptible to alkaline pollution, it is best to use special coatings that are resistant to oxidation and exposure. I believe that as long as you have a certain understanding of the above four kinds of common diseases of wall paint, you can solve the problem of your home wall paint.
What should pay attention to home decoration? TOP
(1) No holes, holes, hanging ceilings and artistic lighting fixtures shall be allowed in concrete circular hole plates.
(2) Paste the tiles on the partition walls. Construction adhesive should be used as cement material. When plastering with cement mortar, the original plaster must be removed.
(3) Before sticking the kitchen, bathroom floor decoration materials, the base layer must be waterproofed, and the signing procedures for qualified inspection of the impounded water for 24 hours must be completed.
(4) The balcony shall not stick to decorative materials other than plastic floor tiles or hardwood floors due to its small weight bearing.
(5) House decoration not appraised by the housing safety appraisal station (room) shall not be arbitrarily repaired on the walls of its bearing walls, partition walls, external retaining walls, and seismic walls. , demolition and reform.
(6) The weight of the decoration of the edge (ground) surface of the house decoration not identified by the housing safety appraisal station shall not exceed 400N per square meter.
(7) The toilet squat toilet shall not be changed at random.
(8) The interior decoration shall ensure the safety requirements for the gas pipelines and equipment. The net distance between the electrical pipelines and equipment and the gas pipeline shall not be less than 10cm, and the net distance between the wires and the gas pipeline shall not be less than 3cm.
Continue to Home Improvement Note "Sensitive Area"
According to the statistics of the Tianheng integrity home improvement technical service center under the home improvement committee of the Beijing Building Decoration Association, the most likely problems in home decoration are the waterproofing of all wooden products, latex paint walls, and bathrooms in the decoration. Due to the problems in these three areas, quality disputes related to home improvement have to account for more than 80% of the total number of decoration complaints. Therefore, you must pay special attention to these "sensitive areas" in your home improvement period during your home renovation season. Especially in materials selection and construction, you must be especially careful to avoid quality problems. In order to prevent quality problems in the “sensitive areas” of home improvement projects, we have prepared a set of relevant articles for you, hoping to help you. Toilet Leakage: Strictly guarding the corners of the house Many homes in the renovation have to knock out the original bathroom tiles and lay new tiles. As a result of this, it is necessary to re-waterproof the wall of the bathroom. If there is a quality problem in the waterproofing project, water stains will hit the next room, and if it is heavy, it will leak downstairs, causing serious damage to your home and neighbors. There are many kinds of materials used for bathroom waterproofing at present, basically the waterproof effect is good. But you should pay attention to the specific construction details. 1. Level the bathroom floor first. If you want to change the floor tiles of the bathroom, you must first level the floor with cement mortar after the original floor tiles are cut, and then do the waterproof treatment. This will prevent leakage of the waterproof coating due to uneven thickness. 2. Joints should be brushed into place. The seams between the bathroom wall and the seams between the upper and lower water pipes and the ground are the most prone to problems. During construction, you must urge the workers to handle these corners. All waterproof paint must be applied in place. 3. Wall treatment is also very important. In the general bathroom waterproofing treatment, a waterproof coating of about 30 cm in height is also required on the wall to prevent water accumulation from passing through the wall. However, if the wall of the bathroom is a non-load-bearing light wall, the entire wall should be covered with a waterproof coating. If your home uses a two-seater shower screen, the two walls that are associated with it must be fully painted. If your home uses a bathtub, the height of the waterproof coating should be higher than the upper edge of the bathtub. 4. Waterproof experiment must be done. After the construction of the bathroom was completed, all the water in the bathroom was blocked, and a 25 cm high “can” was built at the entrance. Then, 20 cm of water was poured into the bathroom. After 24 hours, you can check whether there is any leakage around the wall and the ground. This 24-hour waterproof test is the key to ensuring the quality of the bathroom waterproofing project. You must do it. 5. Keep the water open. All sewers in the bathroom, including floor drains, sanitary ware plumbing, etc., should be kept open. In this way, we can fundamentally avoid the occurrence of the "flooded seven army" tragedy. The general manager of Jardine's boutique home improvement market, Jin Hao Wood Deformation: Maintaining a stable moisture content The most important At present, many families have used a large number of wood products in decoration, such as curtain boxes, heating covers, fixed furniture, wooden lines, and door and window covers. However, once the temperature and humidity in the room change greatly, some wood products will have problems such as cracking, warping and deformation. In fact, many quality problems in home decoration are due to the moisture content of wood products. Whether it is solid wood material or artificial board, all wood products contain a certain amount of moisture. Many consumers believe that the more dry the wood, the better. In fact, this view is biased. The moisture content of wood can only be maintained within the normal range to ensure that there is no quality problem in the decoration. For wood materials used in general households, the moisture content should be around 8%. If the moisture content is too high or too low, it will cause quality problems in the wood in the home improvement. In order to keep the moisture content of the wood stable, you should pay attention to the following points in the decoration: 1. Compared with the use of artificial boards and solid wood materials, the texture properties of various artificial boards are much more stable. Because the solid wood material has a texture, when the temperature and humidity change greatly, cracking, warping, and deformation will inevitably occur. The wood-based panel is to decompose wood into wood chips or wood pulp and re-make the boards. Because the original physical structure of the wood was broken, when the temperature and humidity changed greatly, the "deformation" of the wood-based panel was much smaller than that of the solid wood. 2. Construction Attention Details In home decoration, the key to the quality of wood is construction, especially the details: ● After all the wood products are installed, paint them once. This layer is called "topcoat" paint, not only can protect wood products, but also can play a role in insulating moisture and maintaining the normal moisture content of the wood; ● Can not drown in the binder. In home decoration, white latex is generally used as a binder for joints of wood products. Some workers dip water in white latex in order to cut corners. Not only does this reduce the strength of the binder, but after the wood product absorbs moisture, it is prone to quality problems; ● All the wood should be placed for a few days. After you purchase the wood for decoration, it is best to put it on the decoration site for a few days before use. The purpose of doing so is to make the moisture content of wood close to the level of new homes. 3. Beware of purchasing materials When you purchase wood for decoration, the moisture content of the wood cannot be determined solely by eye and hand touch. So someone sighed: If you only rely on appearance inspections, the moisture content of wood can be described as “divine and difficult to distinguish”. In fact, there are some tips that can help you determine if the moisture content of the wood is acceptable. The characteristics of dry wood are generally obvious, the weight is significantly reduced, the feel is not cool, the sound of knocking is crisp, the sound of “squeaking” sounds when the planer is pushed, the wood shavings are heated, and the planer is light. The wood material with high moisture content has a heavy body, a cold feel, and is not brittle when pushed by a planer, and even the shavings produce water. This type of wood cannot be used. Cracked insulation wall cracking: a lot of clever ways to adopt the current in many new homes, there is a new type of insulation wall with insulation. This type of wall decoration is very vulnerable to the problem of cracking latex paint. In fact, this cracking is caused by cracks in the wall's cement, or the cracking of the wall's "insulation board" joints, not the quality of the decoration, but the architectural insurmountable flaws. In order to pursue the best decorative effect, use decoration to make up for building defects. The decoration company's technicians come up with many ways to deal with cracks in the insulation wall. You can choose according to your own actual situation and decoration budget: 1. After the wall surface is cleaned, first apply a layer of Dacron cloth, kraft paper or newspaper on the wall surface, and use the tension of the fiber to ensure the integrity of the latex paint film. This method is relatively simple and easy, but the effect is general. 2. Remove the insulation board on the surface of the wall, or remove the cement wall. Install a layer of gypsum board or “5 PCT board” on the outside of the insulation layer, and then do the latex paint on it. This practice can remove all irregular cracks, cracks are generally the joints between the plates, better handling. However, this method is expensive and difficult to construct. 3. Use a decorative material with elasticity. At present, on the wall surface treatment, there is a kind of “elastic putty” that can make up for the wall crack problem to some extent. Nippon Paint's "three in one" can also play a role in covering the small cracks on the wall. However, these materials have less "elasticity" and do not work on cracked walls. In addition, some consumers simply remove the wall insulation. Although this method can be used once and for all, it will reduce the insulation and thermal insulation performance of the wall. Therefore, it is not recommended that you use home decoration which is the focus of your home. Each space has its own purpose. However, in the decoration, it is necessary to have a focus: Some rooms need to spend more, and some places can be simply decorated. This not only highlights the key points but also eliminates unnecessary expenses. It should be the basic principle of home improvement.
■ In the important living room of the living room and the bedroom, the form of “little bedroom” is more and more. In this case, you may wish to invest a bit more in the living room and spend less on the decoration of the bedroom.
In addition to using the living room as a receptionist, more functions are the place for family reunion and entertainment. Therefore, it is said that the living room is the family's "face." For "face" decoration, you can spend as much as you can.
The most important thing is to decorate the living room to reflect the characteristics of this family. More money is relative, but there is no need to pile up high-grade materials, the key is to be novel in decoration techniques, in the configuration of furniture, the selection of decorations, to be elegant and generous. In contrast, the decoration and decoration of the bedroom can be a bit simpler. Because the function of the bedroom is relatively simple, it is only a space for people to rest. The decoration is simple and warm, but it does not need to be too sculpted, but the bed must be very comfortable.
â–  Treat "top, wall, floor" differently
At present, the net height of the room is generally low, ranging from 2.50 meters to 2.80 meters. In order not to create a sense of depression, it is better to be simple on the top. From the perspective of human visual habits, the top of the room is the least valued place, so there is no need to be too complicated.
The wall is not covered by furniture. It is used as a backdrop for accessories such as paintings. At the same time, it needs to leave more blank walls for ventilation. Therefore, the wall does not need to spend more money on decoration. In particular, there is no need to do a lot of lines to shorten the sense of height. .
For the decoration of the ground, you need to work hard. Because of the material and color of the floor decoration material, the decoration style of the room is determined. Moreover, the use frequency of the ground is obviously higher than that of the wall surface and the ceiling. Therefore, materials with better texture and color should be used.
The problem of TOP coated bulging coating on wall paints is evident in this case, mostly due to the fact that when the water-soluble paint is used, the water inside the wall has not yet dried out and continues to evaporate from the wall to the surface. Therefore, users of new homes must be fully rehydrated after the water in the walls is completely evaporated. If bulging occurs during the finishing process, the blisters can be scraped off and painted again. The appearance of mildew If the wall is painted under high temperature conditions, dark gray mold often appears on the wall, which is caused by the wall mold growth. Therefore do not work under high temperatures and wet weather. If this happens, the moldy area can be wiped clean and sprayed 1-2 times with 7%--10% aqueous solution of trisodium phosphate. There are many reasons why the coating peels off when the coating is peeled off. For example, the wall surface contains oil, dust, and moisture. Therefore, all the underlayers must be thoroughly cleaned and smoothed before being painted. Coating discoloration Common coatings are often susceptible to yellowing after sun exposure or contamination with alkaline substances, as a result of UV and alkaline oxidation. Therefore, for strong sunlight or areas susceptible to alkaline pollution, it is best to use special coatings that are resistant to oxidation and exposure. I believe that as long as you have a certain understanding of the above four kinds of common diseases of wall paint, you can solve the problem of your home wall paint.
What should pay attention to home decoration? TOP
(1) No holes, holes, hanging ceilings and artistic lighting fixtures shall be allowed in concrete circular hole plates.
(2) Paste the tiles on the partition walls. Construction adhesive should be used as cement material. When plastering with cement mortar, the original plaster must be removed.
(3) Before sticking the kitchen, bathroom floor decoration materials, the base layer must be waterproofed, and the signing procedures for qualified inspection of the impounded water for 24 hours must be completed.
(4) The balcony shall not stick to decorative materials other than plastic floor tiles or hardwood floors due to its small weight bearing.
(5) House decoration not appraised by the housing safety appraisal station (room) shall not be arbitrarily repaired on the walls of its bearing walls, partition walls, external retaining walls, and seismic walls. , demolition and reform.
(6) The weight of the decoration of the edge (ground) surface of the house decoration not identified by the housing safety appraisal station shall not exceed 400N per square meter.
(7) The toilet squat toilet shall not be changed at random.
(8) The interior decoration shall ensure the safety requirements for the gas pipelines and equipment. The net distance between the electrical pipelines and equipment and the gas pipeline shall not be less than 10cm, and the net distance between the wires and the gas pipeline shall not be less than 3cm.
The trend of home decoration in the future First of all, the proportion of “decorative” investment will gradually increase. People will move around once in 5-10 years. This will change the old concept of “renovate once, live forever”. The new house will not be invested too much decoration costs. With the spaciousness of housing and the increase of income, people will buy more high-end furniture, collectibles, etc., that is, “down costs” in interior “decoration”. Second, building design and decoration will attach importance to "storage, display" space. In the future, whether it is in architectural design or interior re-decoration, the housing will add “displaying” to the storage space to increase the cultural atmosphere of the home. Again, the home has a polarization trend. In the next 10 years, the younger generation will still be in a period of relatively frequent changes in work, so homes will not be fixed. In the choice of home, it must be "multi-functional, light, cheap" as well. On the other hand, for those who are successful in their careers, purchasing high-end furniture not only complements luxury homes but also embodies a personality and culture. Therefore, high-end boutiques and even the best furniture will also have a certain market. Fourth, the comprehensive development and application of new building materials and decorative materials. The proportion of small, high-strength steel materials, make the home "cut off" become more flexible, with this material made of push-pull folding "partition" will be more used in the kitchen and dining room, bedroom and living room. In the end, "demand" is "reasonable and feasible." In residential buildings, more and more reinforced concrete frame structures will be adopted. The advanced design of “one unit and one large space” will create good conditions for future indoor space changes.
Renovation materials should be reasonable TOP For an ideal home, everyone has their own set of ideas, and communication between designers and owners can not be ignored. First of all, to make some preliminary understanding on the selection of construction materials, it is helpful to the division and selection of indoor areas and functions. Marble is commonly used in entrances and living rooms in home renovations. Its advantages are easy to clean, luxurious appearance, long service life, not afraid of being scratched, not afraid of heavy pressure, natural beauty, and appearance. The disadvantage is that natural stone is expensive and relatively heavy. Its heavy pressure has a certain impact on the physical structure of the building. The general property will impose restrictions on the thickness of the marble and the construction time will be longer. Wood floor is generally used in the living room, bedroom and other areas, the floor is divided into two categories, namely, solid wood flooring and laminate flooring. The advantages of solid wood flooring are natural warm colors, soft feeling, comfortable, natural texture and excellent texture. The disadvantage is that the wood shrinks wet and swells, easily deformed, easy to infest, flammable, non-wearable, difficult to match with the pattern, and complicated to maintain. It is easy to lose its luster for a long time. Composite wood flooring is very wear-resistant, scratch-resistant, pressure-resistant, easy to deformation, easy to clean, strong flame retardant, anti-static, anti-moth-eaten, easy and quick installation. However, the foot feeling is not good and the elasticity is poor. Common areas such as kitchens, toilets, and balconies can be floor tiles, wall tiles, and bricks. Its advantages are easy to clean, easy to install; rich colors, patterns and diverse. The whole body brick has high hardness, even if the surface is damaged, it does not affect the appearance, is durable, and its weight is lighter, has little effect on the building body. Bedrooms and children's rooms are more suitable for carpets. The advantages are the appearance of luxury, and the chemical fiber carpets are cheap, very soft, warm, moisture-proof, and light-weight; while wool carpets are naturally woven and have a sense of return. The disadvantage is that the carpet is dirty and difficult to clean thoroughly. Home decoration is a major event. When choosing materials, you cannot choose materials based on personal preference or luxury. It is better to have an overall plan for the family situation in the next three to five years, and fully consider recent planning, integrating your own hobbies and various Material characteristics, price, choose the decoration materials that are suitable for you.
How to choose wallpaper TOP wallpaper, especially on the grade wallpaper, the price is not cheap. How to choose the wallpaper, how much is appropriate to buy, this must have some understanding of the wallpaper before the selection, so as not to regret it. The color of the wallpaper is divided into cool color and warm color. The warm color is mainly red, yellow and orange. The cool color is mainly blue, green and gray. If the color of the wallpaper can be matched with furniture, curtains, carpets and lights, the room environment will appear harmonious. 1. Tips: Because the bedroom, living room, and dining room are not the same in their respective uses, it is best to choose different wallpapers to achieve a harmonious effect with the furniture. Smaller or dark room, should choose a smaller pattern, lighter color wallpaper, giving a bright, spacious sense. 2. Usage estimate: When estimating the wallpaper used in the room wall, the area of ​​the general room is × 3 ÷ 5.2 = the required number of rolls (a roll of wallpaper is generally 52 cm wide, 10 meters long, and an area of ​​5.2 square meters). In order to be safe, add another volume based on the number of required volumes. Since the structure of individual houses is different, when determining the actual quantity required, please confirm by the professional or construction unit on the spot, otherwise no matter how much wallpaper is purchased Too few or too many are inconvenient for consumers, because some wallpapers are of the same serial number, but due to different production dates, there may be subtle differences in color, and the lot number on each wallpaper represents the same color, so the purchase is Also note that the number and batch number of each roll of wallpaper is the same.
How to choose a wall tile TOP
Buy wall tiles, pay attention to its water absorption, high quality tiles, water absorption is very low. The wall tiles with high water absorption rate will ca

Steel Entry Double Door

Steel Entry Double Door,Exterior French Doors ,Exterior Front Doors ,Wooden Door

Wooden & Timber Door Co., Ltd. , http://www.china-steeldoors.com