Six precautions for buying a wooden tub
Six precautions for buying wooden tubs
Now, bathing in wooden barrels has gradually become more and more popular with young people who value quality of life. More and more people are beginning to configure this "green ware."
The barrels on the market are also diverse, with a variety of brands. Consumers are not paying attention, and it is easy to buy poor quality wooden barrels. The quality of wooden barrels is not easy to identify, but in the later period of use, there are various problems that gradually arise in wooden barrels with problems. In order to help everyone to better buy wooden bath barrels, special offer the difference between brand barrels and miscellaneous brand barrels to everyone, to help everyone better buy to the heart of the barrel.
First: The difference in appearance. The appearance of a good barrel is smooth, with a delicate and delicate touch. The barrel hoop and the barrel wall are tightly bound together. The poor barrels were rough and touched with a slight twist. The joint between the bucket hoop and the barrel wall is slightly separated and the hoop welding spot is not smooth.
Second: the configuration of the attachment. Good barrel downhole valve is configured to be flush with the brand name jumper and the bottom plane of the bucket. The tight combination will prevent water from seeping into the wall of the bucket. The poor bucket will be equipped with a drain valve of a few dollars. Water leaks, especially after two-thirds of the water is full. Between the water valve and the bottom of the bucket is uneven, there are adhesive marks, easy to seep into the inner wall of the barrel, and finally the barrel appears black!
Third: The use of paint. Good wooden barrels are painted with spray paint equipment. The cleanliness of the air during the painting process is high and no impurities can enter the paint surface. The paint uses a water-resistant, heat-resistant, and corrosion-resistant name paint. The poor barrels use paints that are resistant to water, heat, and corrosion. After a long time, the paint film will blisters and will turn black. Moldy phenomenon.
Fourth: Drying of wood. Good wooden barrel drying rooms are regular drying rooms, with temperature control devices and humidity control devices. The shape of the wood is good, and it can basically eliminate the deformation of the wood after drying. The poor barrels, especially the barrels produced by the hand-workshops, have almost no drying equipment, let alone humidity control. The barrels produced were very deformed later. There is even a high rate of cracking and disengagement (barrels may crack, but the chance of cracking a brand name is much smaller).
Fifth: Packaging. The packaging of brand-name products is very particular. There are cartons at the printing site, the name of the factory, and foam pads inside to prevent shipping damage. In order to save costs, poor packaging costs are eliminated.
Sixth: after-sales service. Well-known manufacturers have a perfect after-sales service system to solve the after-sales problem. Return, exchange timely and thoughtful
Three trees painted wardrobe brand paint
Okoume Face/Back Poplar Core Plywood
General size parameters of poplar plywood:
Size:
1220mm*2440mm
Thickness: 5-20mm
Forming: one or two times.
Poplar veneer: color or mahogany awgu or bleached poplar skin etc.
Sandwich: the whole core or broken core
Glue: /E2/E1
Widely used in sofa, flat panel furniture, solid wood composite furniture......etc..
Okoume Face/Back Poplar Core Plywood
Poplar Core Plywood, Okoume Plywood, Okoume Face/Back Poplar Core Plywood
HUAIAN HONGXIN INTERNATIONAL TRADE CO.,LTD , http://www.hongxin-trade.com