Small lifting platform operation precautions
Safety Guidelines for Operating a Small Lifting Platform:
When using a small lifting platform, it's essential to follow all safety procedures to ensure both the equipment and personnel remain protected. Here are some important precautions you should always keep in mind:
1. If the lifting platform fails to rise and you hear a loud noise from the overflow valve, stop operations immediately. This sound often indicates that the system is under excessive pressure, which can cause the oil pump to overheat and sustain serious damage. The relief valve is designed to protect both the machine and the operator, so never attempt to adjust it without proper training or authorization.
2. Always place the lifting platform on a solid, level surface before starting any operation. Working on uneven or unstable ground increases the risk of the platform tipping over, which could lead to serious injuries or equipment damage.
3. Never exceed the load capacity specified on the nameplate. Overloading the platform can cause mechanical failure and pose a significant danger. In emergencies, a maximum of 10% overload may be allowed, but only if absolutely necessary and with extreme caution.
4. Distribute the weight evenly across the center of the platform whenever possible. In certain situations, an eccentric load may be acceptable, but there are strict limits: longitudinal eccentric loads must not exceed half of the rated capacity, and lateral eccentric loads should not go beyond one-third of the rated load. Additionally, any off-center weight should be at least 300 mm away from the edge of the platform to prevent instability.
5. Secure materials like pipes or other rolling objects properly before lifting. Unsecured items can shift during operation, leading to accidents or damage to the platform.
6. Do not operate the lifting platform without proper protective measures in place. Manned lifts must have guardrails and anti-rupture valves installed. These safety features help prevent accidents in case of a sudden failure, such as a broken hydraulic line.
7. Keep your hands, feet, and clothing away from moving parts while the hydraulic lift is in operation. Accidental contact can result in severe injury.
8. Use the "up" or "down" button to control the platform’s movement. If the worktable does not respond, stop the operation immediately and check for any issues before continuing.
9. Only remove heavy objects after the platform has completely stopped. Attempting to do so while the platform is still in motion can lead to dangerous situations.
Following these guidelines will significantly reduce the risk of accidents and ensure safe and efficient use of the lifting platform. Always prioritize safety and never rush through the process. For more detailed information, refer to the manufacturer's manual or consult a trained professional.
1.Solar powered outdoor lighting with a maximum run time of 24 hours!
2.15W LED Lamp gives of a strong glow each night
3.Easy to install and requires no wiring, assembly or maintenance
4.Sets up in seconds and starts gathering power the moment its exposed to the sun
5.Over charge and discharge protection provide fail-safe mechanisms against faulty batteries
6.Has a lithium battery with an expected lifespan of 4-5 years
7. The powerful solar panels will absorb all the necessary energy during the day, for long time use at night. An over charge & discharge protection system ensures, your batteries are always protected from solar energy fluctuations. Will last for 24 hours
Solar Yard Lights,Solar Outdoor Lighting,Solar Lights For Garden,Solar Garden Lights
Yangzhou Beyond Solar Energy Co.,Ltd. , https://www.ckbsolar.com