There are many steps in the construction of the wall. Before the construction, inspections must be done because the conditions of each wall are different. If there are special circumstances, special treatment should be done to ensure the quality of the wall construction. In general, the wall has the following three conditions.
![]()
Three common wall conditions
Case 1: Cement wall. This is a common situation when new homes are delivered. A thorough inspection shall be made of whether the cement wall surface to be painted is firm and flat. If the wall is not strong enough or there are large cracks and holes, it is recommended to complain about the developer or property and ask them to redo or repair it.
Situation 2: White walls. Now that many commercial houses are already white walls, the seemingly clean ones may actually be more hidden. First of all, we must check the firmness of the current wall and see if the existing white material is resistant to water. If it is not water-resistant or water-resistant, from a long-term use point of view, rework should be scraped out and, for short-term use, it can be retained, but it is better to do another curing step. At the same time, it should also be checked as a whole whether there is an empty drum on the wall. In the event of an empty drum, it must be shoveled out. Other inspection items are the same as in the first case.
Case 3: The wall has been decorated. The wall surface has been decorated with wallpaper or latex paint, which is a common situation in second-hand housing. In general, the original surface decoration should be removed before the second decoration. If it is a wallpaper, the wallpaper should be removed first. If it is a latex paint, the latex paint should be polished first. After the surface decoration is removed, reference may be made to Scenario 2 to determine if the wall should be scraped.
![]()
Wall inspection steps
NO.1 Checking whether the wall surface is firm and flat is a step of checking room. Look at the wall is not strong, for the cement wall, you can do this: find a hard point of the object (such as keys, screwdrivers, etc.), draw a stroke in the wall to see if it will draw a pit and dregs serious. There are no shortcuts to finding cracks and holes, but only care and patience.
NO.2 kitchen bathroom water more, it is recommended that the best wall tile, the top wall is best to do ceiling.
NO.3 white wall condition, check the material is water resistant can be operated as follows: find a wall, splash a little water, hand rub a look to see if it will become white pulp. If the white layer can be completely punctured by hand, there is no water resistance. If the hand is covered with white when it is handcuffed, but this layer of white material cannot be destroyed, it means that the material has certain water resistance, so you can find more points to test. When hand rubbed, almost white on the hand is not sticky, it shows that the water resistance is very good. [
NO.4 White wall water resistance is not good, but for some reason (such as short-term residence) is not willing to do wall treatment, you should do a good job curing. For details, see step 3.
NO.5 In addition to water resistance, emptying is a big problem that must be taken seriously. Although some developers currently use water-resistant materials (such as water-resistant putties) on the surface, they use inferior gypsum powders for leveling. After a short time, they will show empty cracks. Even longer, they may even appear as a whole. Cracking. In the face of this kind of hollowing, it is best to shovel out redo!
![]()
NO.6 Check whether the old wall is firm: 1 visually check whether there is peeling, cracking, and drumming; if it is not, then it is not strong; 2 look for a blunt instrument (such as a small hammer) to knock on the wall to check if there is an empty drum, and if so, Solid; 3 After polishing the latex paint, throw some water, shovel it with a shovel to see if it is easy to shovel off, if it can be easily shoveled off, it will not be strong.
Editor reminds: The old house will appear broken corners, uneven and so on. Pay attention to the local leveling of the corner. In summer, the weather is sometimes dry. If you do not use it for a day, use some tips to keep it dry. Put a layer of plastic cloth or plastic wrap in a bucket filled with putty, and then pour some water on it. When the next day is spent, simply drain the water and remove the plastic sheet or plastic wrap to continue using it.
Second-hand House Renovation Three trees Paint porch Decoration Paint Lacquer Decorated Wallpaper Cement Kitchen Toilet Ceiling Bathroom Ceiling Material Bathroom Tiles Monolithic Bathroom Tiles Tiles Kitchen Tiles
Safety grating also named diamond Safety Grating , anti slip grating, anti skid stair treads.
Safety gratings protect workers through its unique one piece steel or aluminum diamond-shaped construction which provides gripping friction to the sole of a shoe in all directions. The raised diamond-shaped spokes allow mud, ice, snow, grease, oil, chemicals and detergents to drain through the holes leaving the surface free of any slippery substances. The serrated edges not only provide traction but also include a cushioning effect which evenly distributes the weight of each footstep thus reducing worker fatigue.
Safety grating has a safe surface for industrial and commercial settings and can be used for a number of different applications including work platforms, catwalks, transportation servicing areas, vehicle steps, rooftop walkways and standard stair treads. Grip Strut Stair Treads are even used at ski resorts to provide traction on even the snowiest surfaces.
Specification:
Surface treatment: Hot-dippied galvanized or powder coating.
Materials: iron, zinc plates, stainless steel, aluminum, etc.
Thickness : 1-5mm (based on customer requirements)
Shaped hole: diamond shaped openings round hole shaped opening
Safety Grating
Safety Grating,Safety Aluminium Grating,Safety Steel Grating,Safety Galvanized Grating,Safety Stainless Grating,Perforated Planks,Perforated Walkway
Anping County Guorun Hardware Mesh Products Co., Ltd. ,