How to maintain the wire rope chain hoist
1. After each operation, firstly wipe the mud, dust or oil adhering to the loose end wire rope, loosen the jaws, pull out the wire rope, wrap the wire rope around the collecting frame, and wipe the full length wire rope to store the wire rope. Dry to prevent rust.
2. The hoist should be treated at least 4 times a year, such as using diesel to clean the parts and lubricate with calcium-based grease.
3. When the inside of the movement is filled with mud, cement or other dirt, it can be rinsed with clean water and then cleaned with diesel oil; after cleaning and drying, the calcium-based grease will be greased; finally, the jaws will be loosened and the net will be cleaned with a clean cotton yarn. Grease and moisture on the mouth.
4. When the jaws are worn and the bearing capacity is less than 80% of the rated load, the jaws should be replaced; when the diameter of the wire rope is reduced by 10%, the wire rope should be replaced.
Hejian Deris Both manufacturer and distributor, specialize on Oil Wells Tricone Bit,oil field Tricone Bit,Oil well drill bit , oil drill head ,tricone roller bit
The oil well Tricone Drill Bit advantage
1. Adopt floating bearing structure, the floating element is made of new material with high strength, high elasticity, high temperature resistance and high wear resistance, and the surface is treated by solid lubricant. While reducing the relative linear velocity of the bearing pair, the friction surface temperature rise is reduced, and the bearing life and bearing reliability under high drilling pressure or high speed drilling process conditions can be effectively improved.
2. Adopt high precision metal seal. The metal seal consists of a carefully designed metal seal ring as the axial seal of the bearing. The two highly elastic rubber supply rings are located in the palm and cone seal area as static seals. The optimized seal compression ensures two The metal ring sealing surfaces are always in good contact.
3, the steel ball locks the cone, adapt to high speed.
4. It adopts a full rubber oil storage bladder that can limit the pressure difference and prevent the drilling fluid from entering the lubrication system, which provides a good lubrication guarantee for the bearing system.
5, using a new grease that can withstand high temperatures of 250 ° C, anti-wear.
6. The insert bit adopts high-strength and high-toughness hard alloy tooth. The optimized design of the number of teeth, the number of teeth, the height of the tooth and the unique shape of the alloy tooth fully exerts the high wear resistance and excellent cutting ability of the insert bit. The new wear-resistant material of the steel tooth bit surface welding, while maintaining the high mechanical drilling speed of the steel tooth bit, improves the life of the bit cutting teeth.
Oil Wells Tricone Bit
Oil Wells Tricone Bit,Oil Tricone Bit,Oil Drilling Head,Tricone Bit For Oil Well Drilling
Hejian Deris Petroleum Drilling Equipment Co.,Ltd. , http://www.welldrillingbit.com