Lingbi stone identification skills
Lingbi Stone Identification Skills :
First, look at the back of the stone, that is, the stone root or the bottom. There is no red-yellow mortar attached to the stone root, and it hardens, not glued. Individual small pieces of stone may be basically cleared of the mortar, but the remaining stone roots are still clearly visible. If there are any, look at the following two. If not, you can judge that it may be impersonating.
Second, look at stone skin, stone pattern. The stone skin of the meteorite: Guanghua warm and smooth, slippery like gelatin, very handy (slim, wrinkled, transparent, leaking features do not affect the stone skin). The stone muscle has a special white-gray stone pattern, and its texture is naturally clear and smooth. The original groove is "V" type, the artificially machined stone pattern is "U" type, and the color is not natural. If washed with water, the artificial stone pattern appears immediately, the water is dry slowly, and the original stone pattern is dry quickly. .
The stone produced by Baima Mountain, 4 km west of Yugou Street, is actually superior to meteorite and more beautiful than the meteorite. Common stone patterns include walnut pattern, turtle pattern, butterfly pattern, chicken claw pattern, water pattern, natural smoothness, plus the original wind and the rhythm of stone muscle and color, which fully reflects the ancient and heavy nature. The subtle beauty of the craftsmanship.
Third, play the sound. Because Lingshi is a limestone rock with a hardness of 4-7 degrees and a meteorite at 6 degrees, it can be heard with a finger tap or a wooden stick, and you can hear the sound of the ear, the ancient system and the so-called " The Eight-tone Stone is the Lingbi stone produced by Yunyun Mountain. If there is no sound, it is necessary to consider its authenticity.
Woven Geotextile is interwoven by high tenacity PET or PP filament yarn into a dimensionally stable network.
The inherent characteristics of Polyesterhigh tensile strength and modulus,low elongation, low creep and high longterm design strength makes the good ideal for soil reinforcement application. The fabric develops excellent frictional interaction with a wide variety of soil and granular materials.
The relatively low openings of these fabrics enable them to act as efficient separators preventing the mixing of costly granular materials with finegrained soils. It has reasonably high permeability to prevent excessive buildup of porepressures due to applied loadings.
Multifilament Woven Geotextile are made of individual multifilament yarns woven together into a stable fabric structure with a superior combination of mechanical and hydraulic properties. These product series has excellent resistance to biological and chemical environments normally found in soils and are stable against short-term exposure to ultraviolet radiation.
Product Features:
- High tensile strength and modulus ,low elongation, low creep and high long-term design strength.
- Ease of Construction.
- Cost effective.
- Creep resistance.
- Consistency.
- Less differential settlement
Product Application:
- Separator and reinforcement for paved/unpaved roads.
- Area stabilization.
- Basal reinforcement of embankments on soft ground.
- Reinforced soil steep slopes.
-
Technical data:
Pp Woven Geotextile,Polypropylene Geotextile Fiber,Pp Woven Geotextiles Geotextile,Multifunctional Woven Geotextile
Shandong Tianhai New Materials Engineering Co., Ltd , http://www.chinatinhy.com