Immortal refers to culture management methods

Immortal refers to the culture management method :

After the flowering period in spring, the immortal refers to the thin stems becoming thinner and thinner due to over-consumption of nutrients, and should be watered less, stop fertilizing, and see more light. Move it to the outside in mid-April and put it in the sun. At this time, in the spring drought season, it is necessary to comply with the natural climate, less watering, and keep the basin soil slightly wet. In the first half of June, the flat stems can return to normal. The surface of the potting soil is about 2.3 cm thick. Fermented bean noodles and cornmeal can also be used instead. In addition, it is necessary to continuously apply the dregs water to promote its vegetative growth. If fat, water, and light are right, the stem can grow 3.5 knots and add new branches during this time.

Summer management is important. The main point is to look at the watering of the sky, rational fertilization, neither exposure to the sun, but also more sunshine. The summer mentioned here also means the meaning of the rainy season. Watering must be done in the sky. Stop the watering in the rainy days, avoid the rain, otherwise the branches will fall off. If you accidentally rain for a few times, it will cause the branches to be stripped. Therefore, before the rain, the flowers should be moved to the sheltered area. If the plants are too large and the inconvenience is inconvenient, a large plastic bag can be prepared, and the whole plant can be put on the whole plant. The whole plant can be wrapped with a thin film of texture. In short, the whole plant cannot be allowed. The rain dripped in the basin.

In the rainy season, special attention should be paid to not watering or watering. In general, the potting soil should be kept tightly in the hands and loosened. If the potting soil is too wet and muddy, it will also cause the flat stem to fall off. In the hot summer, there are sometimes short-term droughts. Pay special attention to not pouring large water. It should be lightly poured with small water to prevent rain and rain after pouring enough water. If you want to stop the fertilizer, if the plant is particularly strong, you can also apply some phosphorus and potassium fertilizer to facilitate the differentiation of flower buds in the future. Although the immortal refers to the hi-light flower, it is semi-dormant in the summer, and it is difficult to scold the sun. It can be placed under the shade of the tree or artificially shaded. Do not put it indoors, otherwise the flat stems will become thinner and difficult to flower in winter.

Autumn is a crucial period for its flowering. During this time, water should be poured in time, fertilization, especially phosphorus and potassium fertilizer, to control vegetative growth, appropriate evening room, and timely turn to the sun, so that the whole plant blooms evenly. Autumn is the flower bud differentiation period, and it is also a prosperous growth period, to ensure the timely supply of nutrients and water. In late August, the precipitation gradually decreased, and the weather was relatively dry. At this time, the potting soil could not be dried, and it could be combined with fertilization to fill the water. Fertilizer should be poured with 0.1~0.2% diammonium phosphate and 0.2~0.5% potassium sulfate aqueous solution. It is not necessary to water separately. It is better to apply organic fertilizer with 1~2% dregs water. Such fertilization will increase the acidity of the potting soil, which is unfavorable for the immortal finger grafted with cactus, and should be poured 0.5~1% of the small grass ash water for l~2 times.

In order to promote the formation of flower buds, it is necessary to control the growth. After the end of September, the newborn flat stems and the narrow or deformed slender shaped flat stems are removed, and the sunbathing wheel is also sprayed in time, every 6 to 7 days. In about late January or early December, the ends of the flat stems begin to thicken and appear reddish, and flower buds will soon appear. The time to enter the room should be delayed as much as possible, but at the latest before the first frost. After entering the room, place the plants in a warm place where you can see the light. When the flower buds are like the size of the rice, do not move the position, otherwise it will fall off the bud. At the same time, it is necessary to apply fertilizer. When the flower bud grows to the size of the buckwheat grain, it is necessary to lose weight. When a few buds grow to the size of the peanut kernel, the fertilization can be stopped, and the water is properly controlled. When a small number of flowers bloom, control the water: keep the soil without cracking. After careful management, the immortal refers to more flowers and bright colors. Moreover, the flat stem oil is green and shiny without losing water. After the flowering (from late February to late March), the whole plant is still beautiful in appearance, slightly rested, and new shoots appear in April.

Euro profile Lock Cylinder is used for Cylinder Lock by unscrews tools. It is easily rekeyed and easy to use with high security. 

Advantage:

The main advantage is easy to be removed and mounted without using special tools.

Because the cylinder is profiled euro standard, it can be used for all cylinder lock from different manufacturer.  So, once user need to rekey their lock, they just need to change the lock cylinder.

The cylinder in different formats that can all be used the same type of key. This may have the user make the choice of KEY ALIKE SYSTEM,MASTER KEY SYSTEM which were convenience to use with high security.

Type of cylinder

Reversible computer key(also named Dimple key or Hollow coding) lock cylinders. 6pins / 7pins /10 Pins are available to assure the high security. The special device   achieve the snapping.

Reversible computer key with snaking key way to supply more code combination. Also, the bump can be resistant.

Telescopic pin cylinder are made for high security , high level quality with big quantity`s combination

Teeth key cylinder with high security.

MK/KA/YKA/GMK are available


The usage of lock cylinder system :

Individually Keyed System(KD)

With an individually keyed system,each cylinder can be opened by its unique key.

Key Alike (KA)

This system allows for a number of cylinders to be operated by the same code key.It is ideally suited to residential and commercial applications such as front and back doors.

Master Keyed (MK)

A master-keyed system involves each lock having its own individual key which will not operate any other lock in the system,but where all locks can be operated by a single master-key.This is usually applied in commercial environments.

Grand Master Keyed (GMK)

This is an extension of the master-keyed system where each lock has its own individual key and the locks are divided into 2 or more groups.Each lock group is operated by a master-key and the entire system is operated by one grand master-key.This is ideally utilized in complex commercial systems.


Pc key cylinder lockComputer key cylinder lockCut key cylinder lock

Euro Profile Cylinder Lock

Euro Profile Cylinder Lock,Brass Euro Cylinder Lock,Euro Lock,Computer Key Lock

Rayma(SJZ) International Trading Co., Ltd. , http://www.raymalock.com