How to identify and select the baseboard
Materials
At present, there are many types of skirting boards on the market, and home decoration mainly uses profiles made of wood, composite materials and plastic materials. When selecting the material of the skirting board, consideration should be given to the material of the flooring material.
The color selection of the color baseboard should be different from the ground and the wall. It is recommended that the color of the skirting board should be selected between the ground and the wall. At the same time, the color can be determined according to the area of ​​the room: the skirting board with a small room area should be selected to be close to the ground, and vice versa. The color near the wall.
Line type
The line pattern of the skirting board should not be complicated and should be consistent with the overall decoration style. Among them, the wooden skirting board has been widely used due to its wide adaptability, strong workability, and convenient construction.
In the market to buy a wooden skirting board, should first visually measure the appearance of its quality: plywood and wood products must not have the appearance of dead knots, pith, rot and other defects; line type should be clear and smooth;
Entrance decoration restaurant decoration room family decoration style decoration decoration style
A solder ring fitting, also known by the trademarked name Yorkshire fitting,is a pre-soldered capillary connector for joining copper pipes used in plumbing.While less convenient than compression joints and less reliable than flux solder joints, they are useful when fitting in confined spaces and where single handed fitting is required.
To obtain perfect joins, the inside of the fitting and the outside of the copper pipe are cleaned using coarse steel wool, flux paste is applied, the pipe is inserted into the fitting and heat applied from a portable propane torch until a ring of solder shows at the edges of the fitting. To obtain a durable joint, water must not be poured on the solder joint to cool it. Yorkshire fittings are now made with lead-free solder.The fittings come in a great variety of configurations, such as Tee-pieces, straight couplers, elbows or bends, reducers (to join pipes of different diameters), stop-ends, and there are versions with screw threads (male or female) at one end to fit taps and galvanized iron pipes.Valves such as stoptaps & gate valves are also available in solder ring configuration.
Solder Ring Copper Fitting,Solder Ring Elbow Copper Fitting,Copper Pipe Nipple Fitting,Copper Connector Fitting
Linhai Yongsheng Pipe Co.,Ltd , http://www.yspipefitting.com