Emergency light installation and maintenance
1. In the engineering design, in order to facilitate the usual maintenance and management, the fire emergency lighting is preferably powered by a dedicated feeding automatic emergency lighting electric circuit.
2. In order to ensure the reliability of the fire emergency power supply, the condition should be powered by the low voltage emergency bus section of the substation. That is, when the diesel generator set is used as the emergency power supply, as long as the generator is put into use, it will continue to guarantee the electricity. powered by.
3. In the fire state, there is less smoke and more oxygen near the ground, and the instinct response of human evacuation is bending or squatting forward, so local high illumination illumination is more effective than uniform illumination brought by high position installation. Therefore, low-level installations should be promoted, that is, evacuation emergency lighting should be provided close to the ground or at ground level.
4. The emergency lights are delivered in the discharged state, and must be charged for 20 hours before use.
5, the emergency luminaires in use should be regularly checked for performance, every half month or month through continuous switch test to check the circuit conversion and battery emergency function, and discharge to extend battery life.
6. Do the fire protection of the distribution line. When it is darkly laid, it should be laid in the non-combustion structure. The thickness of the protective layer is not less than 30mm. When wearing the metal tube, wear the fireproof coating on the outside of the steel pipe or adopt other fire prevention measures. Use fireproof cables or fire resistant cables and wires.
PU ROD is with excellent in anti-abrasion and high elasticity. There are different thickness and size. Their mainly function is to reduce pressure. PU Sheet is widely used as Cushion, Anti-Pressing and Heavy Load parts.
Applications :
• Conveyor drive and idle rollers
• Hydraulic and pneumatic seals
• Bearing pads,rollers,gear wheels,bushes
• Conveyor belt scraping blades
• Printing rollers
• Cyclone nozzles
Key Features :
• High load bearing capacity
• More durable than conventional elastomers
• Width range of physical properties
• High impact resistance
• Low unlubricated coefficient of friction
• Good water resistance
• Resists cracking under repeated flexure
• Ramains flexible at very low temperatures
Yellow Pu Rod, Red Pu Rod, Light Yellow Plastic Pu Rod, Long Pu Rod
SHENZHEN XIONGYIHUA PLASTIC INSULATION LTD , http://www.xyhplastic.com