What is the price of ion fan? How to maintain the ion fan?

Ion fan is a device used to remove static electricity. The ion fan is composed of three parts: corona discharger, high voltage power supply and air supply system, and the corona discharger plays a main role in the ion fan. The principle is based on the tip discharge phenomenon and the neutralization of positive and negative electricity. According to different boosting principles, there are three types of boosting, including high-frequency piezoelectric oscillation multiple boosting, conversion of the primary and secondary coil boosting, and positive and negative. Group boost. So what is the price of the latest ion fan?

 

　　 Ion fan price

 

FEITA single-head anti-static industrial ion fan dust removal and electrostatic ion fan large transformer section PC-type ion fan regulated air volume: ï¿¥ 233.00

Slade SL-001 ion fan in addition to static ion fan static eliminator single-head desktop Slade SL-001 ion fan large transformer section: ï¿¥ 228.00

White light BK5700 anti-static horizontal ion fan industrial static eliminator suspended high-pressure ion fan: RMB 748.00

SL-028SL-010 anti-static horizontal ion fan industrial ion fan static eliminator SL-010 horizontal ion fan (imported quality): ï¿¥ 966.00

SSD ion fan eliminate static electricity alarm desktop ion fan X1HSSD-X1H: ï¿¥ 759.00

Note: The above are all from the network, for reference only.

 

Ion fan maintenance

 

1. Turn the governor switch clockwise until the indicator light is on, that is, turn on the fan to generate ion airflow, and increase the fan speed to turn the governor switch clockwise; the position indicator turned to "off" is off, indicating ion The fan is turned off. To adjust the airflow direction, loosen the bracket torx screws, tilt the body to adjust the up and down position, and then tighten the bracket screws after adjustment. To clean the ion emitter, rotate the cleaning head handle clockwise to stop, and then turn it repeatedly until it is clean.

2. The wind speed and static time of the ion fan are determined by many factors. The two most important reasons are the distance and wind speed of the ion fan. Air ions are constantly neutralizing each other, and cations and anions attract each other through static electricity to form the transfer and recombination of these charges. High wind speed can neutralize them farther away. The higher the wind speed, the faster the neutralization of static electricity. When using an ion fan for electronic assembly, the ionized airflow should cover the working area as much as possible, so that the positive and negative charges on the surface of the object can be well neutralized, so that it maintains the neutral state.

3. To clean the launch point of the transmitter, rotate the cleaning head handle clockwise to release it after stopping, and then turn it repeatedly until it is clean, at least once a week. The air inlet net and the ionization outlet net should be kept clean to prevent blocking airflow, and can be cleaned with a soft brush or compressed air.

4. Use a plate load monitor to measure, or an ion tester to measure ion balance. The test instrument brand is CIMCO (ME-268A) in the United States, or the ion balancer (residual voltage) is used to measure the ion balance (residual voltage). The output design of the ion fan for the ion quantity is stable and fixed. Due to the possibility of being affected by factors such as voltage fluctuations and ambient air dry humidity, an offset in ion balance may be formed.

The above is the content about ion fan price and maintenance introduced to you. The ion fan's ion circuit uses an advanced closed-loop control series. The circuit can automatically control the amount of positive and negative ions according to the voltage installed on the sensor at the air outlet, thereby ensuring that the ion fan has a good ion balance and wide Temperature range.

Splice Sleeves for ACSR Conductor is one kind of single oval tube through usage of cushion between two pieces of conductors on overhead transmission line. When pinching Splicing Sleeve on the conductor or lightning conductor, the sequence will go on in turn from the one end of conductor to the other end for the purpose of ensuring the normal working condition through sustaining full-tension connection on the conductor or lightning conductor.

The Splicing sleeve for ACSR conductor
1. Certificate: ISO 9001 
2. Fashion design, compacted structure, easy installation 
3. Energy-saving, excellent quality and competitive price
4. Reduce the static stress of fiber optic cable
6. Improve the ant-vibration ability of optical cable
7. Inhibite the dynamic stress of wind vibration
8. Higher Safety performance 

If you have any questions, please contact with us directly.
Our company is solemnly committed to the majority of customers: reasonable price, short production cycle, considerate service. We look forward to cooperating with you.

Splicing Sleeve

Splicing Sleeve,Splice Protection Sleeves,Compression Splicing Sleeves,Electric Splicing Sleeve

Shandong Vantage International Trade Co., Ltd. , https://www.steelplate.be