Rice balanced fertilization technology
2018-08-10 02:01:25
Balanced fertilization is the comprehensive use of agricultural scientific and technological achievements, according to the fertilizer requirements of crops, soil fertility performance and fertilizer effects, the appropriate amount and proportion of fertilizers are proposed before birth, and the corresponding fertilization techniques. Promote balanced fertilization technology, fully utilize fertilizer resources, increase fertilizer utilization, increase crop yield, improve product quality, reduce production costs, improve economic efficiency, and at the same time restore and improve soil fertility, reduce environmental pollution, and improve the safety of agricultural products. It is an important measure for increasing agricultural production and increasing farmers' income.
I. Technical introduction  Balanced fertilization should master the principle of soil production, nitrogen production, lack of supplement, organic and inorganic combination, and balanced application of nitrogen, phosphorus and potassium. The method is:
The first is to measure the soil. Soil testing is the premise of balanced fertilization. Through the analysis and determination of soil nutrients, the soil fertility performance can be accurately grasped, which provides a scientific basis for balanced fertilization. According to the analysis of the results of some rice soil nutrient surveys in recent years, after the second soil survey conducted in the 1980s, the soil available nitrogen and available phosphorus increased significantly, the available potassium content decreased, soil nitrogen supply and phosphorus supply. Good performance, lack of potassium;
The second is the formula. Formulation is the key to balanced fertilization. On the basis of soil testing, according to soil characteristics, climatic characteristics, cultivation habits, production levels and other conditions, the target yield is determined, and the optimum amount of nitrogen fertilizer and the optimal ratio of nitrogen, phosphorus and potassium are proposed. The fertilizer requirement of rice is 2.0-2.4 kg of nitrogen, 0.9-1.4 kg of phosphorus pentoxide, 2.5-3.8 kg of potassium oxide, and a ratio of nitrogen, phosphorus and potassium of about 1:0.5:1.3 per 100 kg of rice; The third is fertilizer (for fertilizer). Choose high-quality, high-efficiency single fertilizer or special fertilizer, compound fertilizer, organic and inorganic compound fertilizer and other fertilizer varieties; Fourth, fertilization mode. According to the soil type, the fertility characteristics of the crop and the fertilizer requirement, the corresponding fertilization mode is formulated.
Second, the operating procedures According to the characteristics of the fertilizer supply of rice in our province and the requirements of rice fertilizer and production level, the operation rules of balanced fertilization technology for rice yielding 400-500 kg per mu are as follows:
1. Organic fertilizer dosage: According to the research, in order to supplement and update the soil organic matter, at least 200 kg of organic fertilizer should be applied per mu per year. Therefore, to re-apply organic fertilizer, the amount of organic fertilizer accounts for about 50% of the total fertilization amount. Generally, the early rice is applied with 1500-2500 kg of fresh green manure or 1000-1500 kg of manure or 60-80 kg of commercial organic fertilizer, and 200-500 kg of dried straw per acre in the late rice, 1000-1500 kg of manure or 1000-1500 kg of manure. 100 kg.
 2, NPK ratio: According to the soil fertility performance and fertilizer utilization in our province, rice yields 400-500 kg per mu, a total of 10-12 kg of pure nitrogen, 4.5-5.5 kg of phosphorus pentoxide, oxidation Potassium 13-16 kg, nitrogen, phosphorus, potassium ratio of 1:0.4:1.3.
3, fertilizer variety selection: the selection of high-quality and efficient urea, ammonium bicarbonate, calcium magnesium phosphorus or superphosphate; potassium sulfate or potassium chloride and other simple fertilizer or rice special fertilizer, compound fertilizer.
4. Application period: (1) Base fertilizer: organic fertilizer and phosphate fertilizer are all applied as base fertilizer, organic fertilizer is applied before tillage, and 35-40 kg of calcium magnesium phosphate and 15-20 kg of ammonium bicarbonate are applied per mu in the field. , 8-10 kg of potassium sulfate or 6-8 kg of potassium chloride. (2) Topdressing: Topdressing should be divided into two applications. The first topdressing should be applied about 7 days after transplanting, 7.5-9 kg of urea per mu, 6-7.5 kg of potassium sulfate or 5-6 kg of potassium chloride; The second top dressing is applied about 15 days after transplanting, 8-10 kg of urea per mu, 10-12 kg of potassium sulfate or 8-10 kg of potassium chloride. (3) Spike fertilizer: the stage of young panicle differentiation (about 25 days after transplanting early rice and 30 days after transplanting late rice), if the color of the leaves turns yellow, it can apply urea 2-2.5 kg per mu and 3-4 kg of potassium chloride. . (4) Spraying foliar fertilizer: spraying potassium dihydrogen phosphate or rice foliar fertilizer at the booting stage and maturity stage.
I. Technical introduction  Balanced fertilization should master the principle of soil production, nitrogen production, lack of supplement, organic and inorganic combination, and balanced application of nitrogen, phosphorus and potassium. The method is:
The first is to measure the soil. Soil testing is the premise of balanced fertilization. Through the analysis and determination of soil nutrients, the soil fertility performance can be accurately grasped, which provides a scientific basis for balanced fertilization. According to the analysis of the results of some rice soil nutrient surveys in recent years, after the second soil survey conducted in the 1980s, the soil available nitrogen and available phosphorus increased significantly, the available potassium content decreased, soil nitrogen supply and phosphorus supply. Good performance, lack of potassium;
The second is the formula. Formulation is the key to balanced fertilization. On the basis of soil testing, according to soil characteristics, climatic characteristics, cultivation habits, production levels and other conditions, the target yield is determined, and the optimum amount of nitrogen fertilizer and the optimal ratio of nitrogen, phosphorus and potassium are proposed. The fertilizer requirement of rice is 2.0-2.4 kg of nitrogen, 0.9-1.4 kg of phosphorus pentoxide, 2.5-3.8 kg of potassium oxide, and a ratio of nitrogen, phosphorus and potassium of about 1:0.5:1.3 per 100 kg of rice; The third is fertilizer (for fertilizer). Choose high-quality, high-efficiency single fertilizer or special fertilizer, compound fertilizer, organic and inorganic compound fertilizer and other fertilizer varieties; Fourth, fertilization mode. According to the soil type, the fertility characteristics of the crop and the fertilizer requirement, the corresponding fertilization mode is formulated.
Second, the operating procedures According to the characteristics of the fertilizer supply of rice in our province and the requirements of rice fertilizer and production level, the operation rules of balanced fertilization technology for rice yielding 400-500 kg per mu are as follows:
1. Organic fertilizer dosage: According to the research, in order to supplement and update the soil organic matter, at least 200 kg of organic fertilizer should be applied per mu per year. Therefore, to re-apply organic fertilizer, the amount of organic fertilizer accounts for about 50% of the total fertilization amount. Generally, the early rice is applied with 1500-2500 kg of fresh green manure or 1000-1500 kg of manure or 60-80 kg of commercial organic fertilizer, and 200-500 kg of dried straw per acre in the late rice, 1000-1500 kg of manure or 1000-1500 kg of manure. 100 kg.
 2, NPK ratio: According to the soil fertility performance and fertilizer utilization in our province, rice yields 400-500 kg per mu, a total of 10-12 kg of pure nitrogen, 4.5-5.5 kg of phosphorus pentoxide, oxidation Potassium 13-16 kg, nitrogen, phosphorus, potassium ratio of 1:0.4:1.3.
3, fertilizer variety selection: the selection of high-quality and efficient urea, ammonium bicarbonate, calcium magnesium phosphorus or superphosphate; potassium sulfate or potassium chloride and other simple fertilizer or rice special fertilizer, compound fertilizer.
4. Application period: (1) Base fertilizer: organic fertilizer and phosphate fertilizer are all applied as base fertilizer, organic fertilizer is applied before tillage, and 35-40 kg of calcium magnesium phosphate and 15-20 kg of ammonium bicarbonate are applied per mu in the field. , 8-10 kg of potassium sulfate or 6-8 kg of potassium chloride. (2) Topdressing: Topdressing should be divided into two applications. The first topdressing should be applied about 7 days after transplanting, 7.5-9 kg of urea per mu, 6-7.5 kg of potassium sulfate or 5-6 kg of potassium chloride; The second top dressing is applied about 15 days after transplanting, 8-10 kg of urea per mu, 10-12 kg of potassium sulfate or 8-10 kg of potassium chloride. (3) Spike fertilizer: the stage of young panicle differentiation (about 25 days after transplanting early rice and 30 days after transplanting late rice), if the color of the leaves turns yellow, it can apply urea 2-2.5 kg per mu and 3-4 kg of potassium chloride. . (4) Spraying foliar fertilizer: spraying potassium dihydrogen phosphate or rice foliar fertilizer at the booting stage and maturity stage.
ã€Comment】 ã€Print this article】 ã€Close this page】 ã€Large, medium and small】
Stainless Steel Kettle,Water Kettle,Water Pot
Door Hardware Co., Ltd. , http://www.nsdhardware.com